TV Firmware Upgrade Instruction T-ECPDEUC, Samsung, TV UE55ES7000
[ Pobierz całość w formacie PDF ]2012 Samsung TV
F/W Upgrade Guide
Samsung Electronics
Step1. How to prepare the USB Memory Drive
1. Download the firmware file from Samsung.com into your computer.
File Name : T-ECPDEUC_
XXXX.X
.exe
※
XXXX.X
is firmware version.
2. Connect the USB Memory Drive to the USB port of your PC.
Copy the file to USB Memory Drive.
3. Go to the USB Memory Drive, and then double click the file.
4. Click the “install” button.
6. Confirm that a folder containing the
firmware files has been added to the USB
memory drive.
5. The file will be installed.
7. Safely disconnect the USB memory drive
by clicking in ‘Safely Remove’ in Task Bar.
Step2. How to upgrade the Firmware by USB
4. The message for searching for update
files is displayed.
1. Insert the USB Memory Drive
containing the firmware into the USB
port of TV.
Searching for update files…
This may take a minute or so.
2. Turn on the TV and wait around 1 or 2
minutes.
Cancel
3. Press the MENU button, select
5. If the TV finds a valid firmware version,
‘Support’, ‘Software Update’, and then
it displays the message below.
‘By USB’.
Update from version 001005 to version
001010?
Yes
No
6. Press Yes, then TV starts updating.
Updating TV software…
Please don’t disconnect your USB device before
the update finishes.
80%
7. When the firmware upgrade is
complete, the TV turns off and then
back on by itself.
Your TV software has been updated.
Your TV will turn itself off and on again
automatically.
OK
Cautions
While upgrading,
Do not pull the USB Memory drive out.
Do not unplug the power cable.
Do not turn off the TV.
※
Warning
Pulling the USB Memory drive out or unplugging the power cable will cause a
firmware error or main board failure. Firmware errors and main board failures are
not covered by Samsung warranty policy.
[ Pobierz całość w formacie PDF ]